4
INSTALLATION REQUIREMENTS
TOOLS NEEDED
•
1/2" and 7/16” Wrench
•
Phillips screwdriver
LOCATION REQUIREMENTS
•
The stand must be installed on a solid floor. A concrete floor is best.
•
The floor should be level.
•
A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
•
Do not install on carpeting.
•
The location must have appropriate electrical and gas supply outlets. See the
“Electrical & Gas Supply Requirements” section in your product’s User Manual.
•
Do not install in a location where the dryer might come into contact with
combustible materials such as, but not limited to curtains, thick carpet, and/or
any materials that might obstruct ventilation.
STAND DIMENSIONS
75³⅚₄
"
(192 cm)
48³⁷⁄₆₄
"
(123.4 cm)
24¹¹⁄₁₆
"
(62.7 cm)
19¹¹⁄₁₆
"
(50 cm)