background image

12

TV PROGRAM SETTING

COLOUR  SYSTEM
1.Press MENU button to make the main menu display.
2.Press VOL+/- button select TUNING menu, then 
   press CH- button to enter.
3.Press CH+/- button to select COLOUR SYS. item.
4.Press VOL+/- button to select the colour 
    system you need.

SOUND SYSTEM
1.Press MENU button to make the main menu display.
2.Press VOL+/- button select TUNING menu, then 
   press CH- button to enter.
3.Press CH+/- button to select SOUND SYS. item.
4.Press VOL+/- button to select the sound system you
   need.

EDIT PROGRAM
Using this function, you can rename, skip, delete, copy 
and insert the channel.
1.Press MENU button to make the main menu display.
2.Press VOL+/- button select TUNING menu, press CH- 
   button to enter.
3.Press CH+/- button to select EDIT PROGRAM item,
   press VOL+/- button to enter the sub-menu.

RENAME
1.Press CH+/- button to select the channel you need 
   operate, press red button to enter rename mode.
2.Press VOL+/- button to select the number position of 
   channel name, press CH+/- button to select number.
3.During operating, if you want to cancel input, press 
   green button to exit, after setting, press red button to
   save. The channel name set will display before
   channel number on the top right corner of screen.

SKIP 
1.Press CH+/- button to select the channel you need 
   skip, press green button to skip the current channel.
2.During operating, if you want to cancel input, press 
   green button to exit, after setting, press red button to
   save. 
3.When you use CH+/- button to select channel, this 
    channel number will be skipped. But you can still 
   use one direct-digit choosing button to select the 
   skipped channel number.
4.If you want to cancel skip, please select the skipped
   channel and do above steps.

001
002
003
004
005
006
007
008
009
010
    RENAME        DELETE
    SKIP                 COPY
[VOL+/-]          INSERT
[CH+/-]             SELECT
[S.STD]             PAGEUP
[P.STD]              PAGEDOWN
    RETURN

MENU

001
002
003
004
005
006
007
008
009
010
    SKIP     
    OK                 CANCEL
 MENU RETURN  

001
002
003
004
005
006
007
008
009
010
    RENAME     
    OK                 CANCEL
 MENU RETURN  
[VOL+/-]          POSITION      
[CH+/-]             CHAR.

001
002
003
004
005
006
007
008
009
010
    COPY     
    OK                 CANCEL
 MENU RETURN  
[CH+/-]           SELECT      
[S.STD]          PAGEUP
[P.STD]          PAGEDOWN

13

TV PROGRAM SETTING

INSERT
1.Press CH+/- button to select the channel you need 
   insert, press VOL+/- button to drag the channel you
   need move.
2.Press CH+/- button to select the position you need 
   insert. Press VOL+/- button to insert the selected 
   channel in this position, during operating, press 
   green button to cancel insert.
3.For example: insert the channel 5 before channel 2,
   you can first press CH+/- button to select channel5, 
   then press VOL+/- button to drag channel 5, then 
   press CH+/- button to select channel 2, press 
   VOL+/- button to insert this position and save, the 
   program in channel 5 is before the program in 
   channel 2.
4.Using this function can arrange the program order
    as you like.

DELETE
1.Press CH+/- button to select the channel you need 
   delete, press blue button to delete the current channel.
2.During operating, if you want to cancel delete, press 
   green button to exit, after setting, press red button to
   save. 
3.The deleted channel will disappear from the channel
    list completely, you can’t use CH+/- button or one 
   digit selection button to select this channel.

COPY
1.Press CH+/- button to select the channel you need 
   copy, press yellow button to copy the current channel.
2.Press CH+/- button to select the channel you need 
   copy to, press red button to save. During operating
   press green button to cancel copy.
3.The copied channel may have same setting as the 
   original copied channel.

001
002
003
004
005
006
007
008
009
010
    DELETE     
    OK                 CANCEL
 MENU RETURN  

001
002
003
004
005
006
007
008
009
010
    INSERT   
 MENU RETURN      CANCEL
[CH+/-]             SELECT
[VOL+/-]          OK
[S.STD]            PAGEUP
[P.STD]             PAGEDOWN

COUNTRY
1.Press MENU button to make the main menu display.
2.Press VOL+/- button to select TUNING menu, press 
   CH- button to enter.
3.Press CH+/- button to select COUNTRY item.
4. Press VOL+/- button to select the country you live in.

TUNING

PROGRAM NUMB.            11
COLOUR SYS.                  PAL
SOUND SYS.                     D/K
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
EDIT PROGRAM
COUNTRY                   

Germany

TUNING

PROGRAM NUMB.            11
COLOUR SYS.                  PAL
SOUND SYS.                     D/K
FINE TUNE
MANUAL SEARCH
AUTO SEARCH
EDIT PROGRAM
COUNTRY                   

Germany

Содержание HLD-37MS

















Отзывы: