Haier HL42XZK2a, Инструкция по технике безопасности

Страница: 18 / 38

Operation
Haier LCD HDTV EN-18
Treble
Y
Adjust to increase or decrease higher-pitched sounds.
SRS TS XT
Y
To turn the simulated surround sound on and off.
Equalizer Y
To adjust the equalizer: Off, Rock, Pop, Live, Dance,
Techno, Classic and Soft.
Speaker
Y
: To adjust th e speaker on or off.
SPDIF Type Y
To adjust the SPDIF output: Off, Dolby Digital and
PCM.
AVL (Automatic Volume Control) Y
This will reduces the differences in volume level
among broadcasters.
Audio Only Y
Press / ENTER button to confirm, the following
display will appear on the screen.
Press to select OK , then press OK to confirm. The TV screen
will be black and no picture , but the sound is still normal.
You can press POWER button to reveal the picture on the screen.
If enter Audio Only mode, press POWER to exit!
OK Cancel
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected
SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast is
only in Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to mono sound during
stereo/ SAP broadcasting. Stereo or SAP can be received
in a Analog channel.
Use
A
SAP button to select your desired MTS mode in
a analog signal.
Each time you press
q
SAP button, Mono, Stereo or
SAP appear. If other languages are available on the
digital signal, select them with the
SAP button.
Press
B
EXIT button to save and return to TV viewing.
Function menu
Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
Press
A
MENU button and then use / button to
select Function menu.
Press
B
/ ENTER button and then use /
button to select Language .
Press
C
/ button to select language.
( English , Spanish or French )
Function
Language English
OSD Timeout Short
OSD Transparency Middle
DCR On
Blue Screen On
Time Setup
Closed Caption
Default
Select Back EXIT
Video
Audio
Channel
Lock
Function
DPMS On
/
OSD Timeout
Press
A
MENU button and then use / button to
select Function menu.
Press
B
/ ENTER button and then use /
button to select OSD Timeout .
Press
C
/ button to select Short , Middle or Long .
(Short is for 5 seconds; Middle is for 10 seconds;
Long is for 15 seconds)
OSD Transparency
Press
A
MENU button and then use / button to
select the Function menu.
Press
B
/ ENTER button and then use
/ button to select OSD transparency .
Press
C
/ button to select Low , Middle or High .
DPMS