OPERAITON THEORY OF MICROWAVE OVEN
1. Microwave is a kind of high frequency electromagnetic wave, which is commonly distributed in the
nature. But the existing form of microwave is dispersed so that it cannot be collected together for heating
purpose. The key component of magnetron of microwave oven will transform the energy of electricity to
microwave and huge energy of microwave field is established under the closed cavity. So the molecule of
food is caused to vibrate at very high speed and the friction heat produced will cook the food in a fast
way.
2. There are 3 properties of microwave:
a) Absorbability: the microwave can cause the excess vibration of molecule of various food so as to obtain
the heating purpose. But the infiltration ability is largely depend on the size, thickness and properties of
the food.
b) Penetrability: microwave can penetrate through ceramics, glass, temperature-resistant plastics. It is
required to use the containers whose material have good microwave penetrability to achieve best heating
result. See the below utensils guide.
c) Reflectivity: microwave would be reflected by the metal wall of interior cavity so as to establish an
even magnetic field, thus can prevent the overheating of partial area.
INSTALLATION OF MICROWAVE OVEN
1) To ensure sufficient ventilation, the distance of the back of microwave to the wall should be at least 10 cm,
the side to the wall should be at least 5cm, the free distance above the top surface at least 20 cm.
2) The appliance should be operated with the rear side placed against a wall.
3) Do not place any objects on the top of microwave oven.
4) The position of the oven shall be such that it is far from the TV, Radio or antenna as picture disturbance
or noise may occur.
5) The appliance must be positioned so that the plug is accessible.
6) The microwave oven is intended to be used freestanding and shall not be placed in a cabinet.
7) To keep the microwave oven at a distance from the
8) 15amp power plug to be used
wall, it is necessary to install a distance limiter
Push Distance Limiter
in this direction
1)Push Distance Limiter in the given direction;
2)Make sure Clasp A is secured to Hole A;
Secure Clasp A to Hole A
Hole A
Clasp A
Hole A
Distance Limiter
3)Insert Clasp B and Clasp C into their respective square holes
.
Clasp C
Clasp B
1
2
UTENSILS GUIDELINE
It is strongly recommended to use the containers which are suitable and safe for microwave cooking.
Generally speaking, the containers which are made of heat-resistant ceramic, glass or plastic are suitable
1
