background image

English

2

Thank you for using our Haier product.
This easy-to-use manual will guide you
in getting the best performance from
your Haier Range Hood.

Remember to record the model and
serial number. They are on a label in the
refrigerator.

Model number

Serial number 

Date of purchase

Staple your receipt to your manual.

You will need it to obtain warranty service.

To reduce the risk of personal injury in the event of a range top grease fire:

1. NEVER pick up a flaming pan, as you may be injured.

2.  DO NOT use water, including wet dishcloths or towels, to put out a fire.  A

violent steam explosion may result.

3. Smother flames with a close-fitting lid, metal tray, or cookie sheet.  Then turn

OFF the burner.  BE CAREFUL TO AVOID BURNS!  If the flames are not put out
immediately, evacuate and call the fire department.

4. Use an extinguisher only if:

a) You know that you have a Class ABC extinguisher and you already know

how to use it.

b) The fire is small and contained in the area where it started.

c) The fire department is being called.

d) You can fight the fire with your back to an exit.

CAUTION! 

Important – Observe all governing codes and ordinances.

1. For general ventilation use only.  Do not use this appliance to exhaust

hazardous or explosive materials and vapors.

2.  To reduce the risk of fire, use only metal ductwork.

3.  To avoid damage to motor or other components, keep drywall spray,

construction dust, etc. off the power unit.

4.  Please read specification label on product for further information and

requirements.

SAVE THESE INSTRUCTIONS for Future Use

Содержание HHX2030















Отзывы: