Control panel
A - Program knob
Turn this knob to choose the drying program you desire. This type of
dryer has 11 program options . For description of specific programs, refer
to the list of programs on Page 10. when the drying program is selected,
the relevant indicator light is on.
B - Star t/Pause b utton
After tur ning on the po wer, select the dr ying prog ram y ou desire .
Gently touch this button to start the dryer. Gently touch this button again
during the operation of the dryer and the indicator light and display screen
will flash and the machine will be paused . Press the button again and
the prog ram will contin ue .
C - Buzzer on/off button
When the drying cycle has finished, an intermittent acoustic signal will
sound.Touch this button,the buzzer will be canceled.
F- Delay button
Gently touch this button before a program starts. You may choose to
start the dryer after a preset time. The delay range is between 1 and 19
Control panel
D
ˇ
E composite button and child lock function
During a program, press and hold down both buttons for 3 seconds to
set up the child lock function if necessary.If you press the two buttons
G - LED screen
The screen displays the remaining time for a program, the delay time
and other related information.
Note: The remaining time to start a program is the default time for the
program. During operation, with variation of factors such as the
moisture content The actual remaining time will be automatically adjusted
until the preset drying result has been achieved and the program is complete.
E - Delicate button
When this function is selected, the corresponding indictor light will be
on . During a program, the drying temperature will decrease and the
drying time will increase to take better care of the delicate laundry .
D- Long anti-crease button
If this additional function is selected, the anti-crease phase at the end
of the drying cycle is lengthened by 60 minutes. The laundry can be
removed at any time during the anti-crease phase.
hours. Every touch of the delay button will increment by one hour.
When you pass 19 hours, the delay time will turn off. After a delay time
is set, gently touch the Start/Pause button to the start the delay
operation and the indicator light will flash.
.
H - Maintenance displays
- Empty tank
- Clean filter
- Clean condenser
Important:
After each drying cycle
ˈ
– Clean the filter
˗
– Drain the condensed water container
˗
(See section “Cleaning and maintenance”)
$
%
&
'
(
)
+
*
again, the lock will be cancelled.
