18
Washing dishes
Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as
well as the amount and condition of food remains, with the details contained in the wash cycle table.The
corresponding programme sequence, duration and consumption details are shown in the right half of the
overview. For example:
Use the
“
Normal eco” programme for dishes and utensils which have normally soiled items.
Small loads
If only a small number of dishes have been loaded into the dishwasher, selecting the “Half load” function
which should be sufficient.
Programme data
The stated programme data are based on standard operating conditions. The values can vary
considerably according to:
different amounts of dishes
temperature of mains water supply
pressure of mains water supply
ambient temperature
fluctuations in mains voltage
machine-related factors (e.g. temperature, water volume,...)
Switching the dishwasher ON
Load the appliance and turn on the tap.
Close the door, and set On-Off button “B” to On then the
On-Off indicator “A” light.
Press the programme button “K” to select the programme
you wish, and the corresponding programme indicator “J”
light.
Press the Start/Pause button “N”, then the dishwasher
will start immediately, and the corresponding programme
indicator “J” blinks.
en
K M N
J
L O
A C e
I
B D F G H
