Haier HDV70A1, Руководство по установке

Страница: 17 / 18

TROUBLESHOOTING
Troubleshooting
The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
please contact your Haier authorized service technician.
PROBLEM POSSIBLE CAUSES WHAT TO DO
Dryer stops
working mid-cycle.
Power failure. Check the power supply and restart the
desired cycle.
Dryer has been paused. Touch the ‘Start / Pause’ button to restart
the cycle.
Dryer door is open. Ensure the door is firmly shut.
Dryer is taking too
long/results were
not satisfactory.
Drying cycle selected not
appropriate for the load.
Select an appropriate cycle for the load.
Dryer overloaded for the cycle. Do not overload your dryer. Try dividing
the load in half and dry half at a time.
Lint filter is blocked. Clean the lint filter.
Load overly wet at the start of
cycle.
Remove more water from the load before
placing it in the dryer, eg select a faster
spin on your washer, a speed appropriate
for your load.
Clothes getting too
hot or damaged.
Cycle selected not appropriate
for the load.
Ensure the clothes are appropriate for the
cycle selected.
Items removed from dryer before
the end of cycle cool down had
finished.
Removing items before cool down may
damage clothing if it is not spread out and
exposed to cooler air once removed from
the dryer.
Instructions on care label not
followed.
Follow the instructions on the care label of
the items.
Used a ‘Time Dry’ cycle and did
not monitor the dryness of clothes
during the cycle.
Ensure that clothes are checked for
dryness during the cycle when using the
timed programmes to avoid over drying.
Noises / vibration. Dryer is not installed on a stable
surface.
Ensure the dryer is installed on a flat,
stable surface.
Dryer is overloaded. Remove some items from the dryer.
Creasing. Dryer is overloaded. Remove some items from the dryer.
Indicator light
flashes rapidly
Dryer door is open. Ensure the door is firmly shut.
A fault occurs Contact your Haier authorized service
technician.
Linting. Lint filter not cleaned or replaced. Ensure the lint filter is cleaned after every
cycle and replaced correctly.
15