Haier HD90-A636-F, Инструкция по эксплуатации

Страница: 12 / 48

11 M emo
Press the button for 2 sec to memory the cycle
you want, at the same time the indicator light will
be on. The next time, when you want to use the
stored cycle you just only press the
12 | English
Note: The “ Delay function ” can not be
memoried.
12
Start/Pause
button
Press Start/Pause to Start a drying cycle. Press
button again to pause the drying cycle – indicator
M emo
button. The light is on and the stored cycle is
activated.
Note: This function should be set after you
have finished all the options, otherwise when
you turn the knob or press the button, the
function will be delected automatically.
10 Time Turn the knob to select the Timer program, then
the light of is on Press the button to add
or substract the time.The default time is 30min,
button
Time
the shortest time is 10 min and the longest time is
150min.
Signal
You can choose signal as you need. To active
the signal function after switching on the dryer,
press
Timer± and M emo
for about 3 seconds
until the beep sounds.To deactivate press both
buttons for 3 seconds again until the beep sounds.