Haier HD80-256A, Руководство пользователя

Страница: 6 / 19

Control panel
GB GB
Control panel
10 11
2-Maintenance indicators
The indicators light up in order to remind that the filter must be cleaned and the water
tank must be emptied (see CARE AND CLEANING).
Meaning of icons:
illuminated LED Meaning
Clean the lint filter in the filling opening.
Empty the water tank or check it for correct positioning.
Clean the condensor filter in the base.
If the indicators of cleaning filters light up during the cycle, the drum lamp lights up too.
Please clean the filters.
Additionally see CARE AND CLEANING.
3-Memory mode indicator
If this indicator lights up, the memory mode is set or activated. (see MEMO button)
4-Display
The display shows following information:
illuminated LED Meaning
Remaining programme cycle time in hours + minutes, e.g. 1 : 59
Remaining time in hours of a delayed programme starts, e.g. 13 : 00
F4 Error codes (see TROUBLESSHOOTING)
Programme cycle drying
Programme cycle cooling
End of Programme
By turning the knob one of 16 programmes can be se -
lected (fig. 6). The default settings will be displayed.
6
Extra Dry
Wool
Shoe
Sport Microfiber
Baby
Garment
Towel
Mix
Duvet
Ready to
Store
Ready to
Iron
Synthetic
Extra Dry
Cotton
Ready to
Iron
Ready to
Store
Ultra Care
Underwear
Symbol Function Meaning of symbols
Anti crease function
Anti-crease function at the end of programme in-
creases by 60 minutes.
Delicate function
Function for delicate fabrics like synthetics, acryl etc.
It lowers the temperature and lengthens the drying
cycle time. always this function should be used for
fabrics with icon on the laundry lable.
Signal function
An acoustic signal occurs when you press a button or
turn the programme knob. In addition the signal ap -
pears in case of failures.
7-On/Off button
Touch this button to switch on or switch off the appli -
ance (fig. 8). For switch off press the button for at least
2 seconds.
8
6- Start/Pause button
Press this button gently (fig. 7) to start or interrupt the
currently displayed programme. During operation its
LED is shining, or if interrupted blinking.
7
5-Programme selector
8 and 9-Function and Selection button
These buttons allow to select various functions to the
programme.
1. Touch sequentially Function button (fig. 9) until
the required symbol is flashing in the display.
2. Touch Selection button (fig. 10) for activating the
choosen function- corresponding icon lights up.
Additional a checkmark is set in column Selection.
3. Use the same method continue to select other
function as you need.
Timer Timer Temp. Dry Level Selection Function
功能 选择 烘干等级 温度 时间 时间
+
+
emo Function Zeitvorwahl
ECO
Level Option Auswahl
1.
Timer Timer Temp. Dry Level Selection Function
功能 选择 烘干等级 温度 时间 时间
+
+
emo Function Zeitvorwahl
ECO
Level Option Selection
2.
9
10
Notice
After each switch-on, the appliance suggests the economical programme “Cotton-
Ready to store“ for drying normal wet cotton laundry.