Haier HCE302TB3, Инструкция по эксплуатации, Страница: 16 / 40

Connecting the cooktop to the mains power supply
IMPORTANT!
●
This cooktop must be connected to the mains power supply only by a
suitably qualified person.
●
This cooktop must be earthed.
●
Before connecting the cooktop to the mains power supply, check that:
●
The domestic wiring system is suitable for the power drawn by the
cooktop
●
The voltage corresponds to the value given on the rating plate
●
The power supply cable sections can withstand the load specified on the
rating plate.
●
To connect the cooktop to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and fire.
●
The power supply cable must not be kinked and must not touch any hot
parts.
●
If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any
accidents.
●
If the appliance is being connected directly to the mains supply, an
omnipolar circuit breaker must be installed with a minimum gap of
3mm between the contacts.
●
The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
●
The cable must be checked regularly and only replaced by a properly
qualified person.
●
The power supply should be connected in compliance with the relevant
standard, or a single-pole circuit breaker. The method of connection is
shown below.
IMPORTANT!
Check with an electrician whether the domestic wiring system is
suitable without alterations. Any alterations must only be made by a
qualified electrician.