ENGLISH
Installation Manual
7
Step 3
A foam tape is provided to seal the cooktop edges to
the countertop.
Apply tape approximately 1/16" (1.5 mm) from the
glass edge to the underside of the cooktop glass. Use
tape around the entire glass perimeter. Cut off excess
where tape ends butt.
Step 2
Place a towel or table cloth onto the counter top. Lay
the cooktop upside down onto the protected surface.
BURNER BOX
TABLE CLOTH
Figure 6
BURNER BOX
COOKTOP GLASS
FOAM TAPE
SEAL
Figure 7
Figure 9 (Mod. 30”/36”)
Figure 9b (Mod. 24”)
Figure 8
Step 4
Insert the cooktop centered into the cutout opening.
Make sure the front edge of the counter top is parallel
to the
cooktop. Make inal check that all required
clearances are
met.
Step 5
Four clamp brackets are provided to clamp the cooktop to
the countertop. Tighten screws just enough to hold brackets
in place when cooktop is put into cutout. Tighten screws
securely.
