background image

 

.  

 

 

SERVICE MANUAL

Model: HC17SF10RB/HC27SF10RW/B

4

Issue   2014-3-10 

Rev.  Ref1403S005V0

receptacle. Don’t press the line under the cabinet or step on it. Take care not to roll on or damage the 

supply line when moves the machine from the wall.   

12.  In the case of leakage of inflammable gases like carbon monoxide, open the door and windows. 

Don’t pull out or insert the plugs of the appliance. 

13.  Don’t touch the refrigeration surface of the freezing compartment when the refrigerator is in 

operation, especially when our hand is wet, else we may be glued to the surface. 

14.  Pull out the plug of power supply during clearance or power outage. Wait at least five minutes to 

resume the power supply in order to prevent damage to the compressor caused by continuous restart. 

 

Photo used in this manual 

The illustration and photos used in this Manual may not base on the final design of products, which may 

differ from the products in some way. 

1-3. How to read this Service Manual 

1-3-1. Using Icons 

Icons are used to attract the attention to specific information. The meaning of each icon is described in the 

table below: 

Note:     

 

 

A “note” provides information that is not indispensable. 

Caution:  

 

  A “caution” is used when there is danger that the reader, through incorrect manipulation, may damage 

equipment, loose data, get an unexpected result or has to restart (part of) a procedure. 

Warning:  

 

  A “warning” is used when there is danger of personal injury. 

Reference: 

   

A “reference” guides to find additional information on a specific topic. 

   

Содержание HC17SF10RB



















Отзывы: