Front Load Washing Machine Model:HBS800/1000TXV
Page 9
●
Remove all the packing materials (including the foam base)
to prevent vibration during use, as shown in Fig. 1.
Upon opening of the package, water drops may be seen on the
plastic bag and the porthole. This is normal phenomenon
resulting from water test in the factory.
Fig
. 1
●
Check attachments and materials with reference to the following
●
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Beforeuse:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Fig
.
3
●
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine.
Before use, the washing machine should be adjusted, as shown in
Fig. 3, so that it is level.
Fig.
2
Quty
Name Operation
manual
1
1
1
1
3
Quality
certificate
Water
hose
Drainage
holder
Plastic
plugs
Installation
Содержание HBS1000TXV
