Haier HBF110GSS, Руководство пользователя

Страница: 7 / 9

Defrosting/Cleaning
Defrosting
This chiller has automatic defrosting; the
water runs down the rear wall and
through a drain hole to a tray where it
evaporates.
DO
NOT USE ANY SHARP
INSTRUMENT TO SCRAPE THE ICE
FROM THE REAR WALL.
Any damage arising from incorrect ice
removal will not be covered by the
manufacturer’s warranty.
Cleaning
1. Unplug the appliance.
2. Wash the inner compartment with
lukewarm water and neutral detergent.
3. Dry thoroughly with a soft cloth.
Note:
1. Do not use cleansers such as soaps,
boiling water or acid, etc.
2. Do not use a scourer.
• For efficient operation, dirt and dust
should be removed from the back and
bottom of your freezer from time to time.
To clean the door seal, use mild, soapy
water only.
Moving the refrigerator
• Unplug the appliance
• Remove the contents and empty the
water tray on the compressor before
moving the bar chiller.
Note: Do not hold the bar chiller by its
door or the piping whilst moving.
When a power failure is announced
Do not defrost
• Set the temperature regulator to the
highest figure.
• Do not store any additional items in the
bar chiller.
• Turn the regulator back to the normal
setting when the power is restored.
During a power failure
Do not open the door more often than
necessary.
• Produce in the chiller should keep o.k.
for approx 3 hours during a power failure
providing the door is not opened.
.7.