Haier H3F285 EH1 Series, Руководство пользователя

Страница: 11 / 270

EN
5 - Use
11
Remove all packaging materials, keep them out of childrens reach and dispose them
in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent before
putting any f
●
ood in it.
After the applian
●
ce has been levelled and cleaned, wait for at least 6 hours before con
necting it to the power supply. See Section INSTALLATION.
Precool the compartment for 2 hours at high settings before loading with food. To do
so, please set the temperature to -20 °C or -24 °C.
The appliance is in ope
●
ration as soon as it is connected to the power supply.
The freezer temperature is automatically set to -18 °C. This is the recommended set
ting and the ideal temperature for frozen goods. If desired, you can change the tem
peratures manually. Please see ADJUSTING THE TEMPERATURE.
after 30 seconds. The panel lock might be active.
Notice: Presettings
The appliance is preset to the recommended temperature of -18 °C. Under normal
ambient condition y
●
ou don´t need to set a temperature.
When the appliance is switched on after being disconnected from the main power
supply, it may take up to 12 hours for the correct temperature to be reached.
5.3 Standby-mode of display
operation. The display locks automatically. It lights up automatically when touching any but
ton or opening the door.
5.4 Display lock and unlock
Automatic locking
Display is automatically locked after 30 seconds without operation.
Manual locking
When the display is unlocked, press “Child lock” (G) and hold for 3 seconds, after a beep,
“Child lock”(g) indicator is light, display is locked. When the display is locked, press “Child
locked.
Notice: Displ
●
ay lock
When display is locked, functions such as temperature setting or super freeze are di
sabled. When above operation is attempted, Child lock indicator will blink for 3 times, to
remind that the display is locked.