Haier GV270REMB Скачать руководство пользователя страница 7

Diagram of pipeline installation

   

    

1. Any alteration to the structure of  the solar 
    water heater may cause problems  in use.
2. There are five ways to connect the water 
    pipe to the room: flue,  vent hole, through-
    hole in the wall, pipe  well for solar pipes 
    and embedded sleeves, wherein the  
    former three types are commonly  used. 
    Before installation, the installation staff will 
    consult the entry form and  installation 
    location of the pipe in a comprehensive 
    way and in consideration of  your 
    convenience. A slope in the through-wall 
    must be ensured during pipeline  layout, 
    and sealing shall be guaranteed  to prevent 
    the entry of rain or odors.
3. Keep the smoothness of  the air pipe to 
    prevent the blockage of impurities, which 
    may lead to collapse and  deformation of 
    the water tank under suction  when using 
    water.
4. Do not install a  valve in the overflow 
    pipeline to ensure that the  flood signal can be sent  out rapidly and accurately.
5. To avoid the return of water in the tank, a non-return valve shall  be installed at the joint  of the 
    water upward/downward pipes and the  tap water.
6. The installation project should be confirmed by our professional  service personnel when 
    installing several sets of the series of the products.

Connection of water supply pipes when the solar 
water heater coexists with other water heaters

Please install another non-return valve 
on the cold and hot  water pipes 
respectively if the solar heater coexists 
with other water heaters so  as to avoid 
accidents caused by water returned  to 
the solar water tank through  hot water 
pipe due to high pressure in the tanks.

Tap water

Cold water 
pipe

Other water 

heater

To solar water tank

Non-return valve

Manual valve

Non-return 

valve

Non-return valve

Solar energy hot 

Mixing valve

Mixing valve

Hot water pipe

Installation instructions

Operation instructions

Warning

Notice:
Improper operation of the water heater may lead to serious burns. When using the heater, 
do not make the water outlet of the nozzle aim at the body, mix the cold and hot water 
before use.

Precautions on pipeline installation

  Mixing valve (cold  water)

E

le

c

tr

ic

 h

e

a

tin

g

 w

ir

e

S

e

n

s

o

r  

w

ir

e

Inlet/outlet 
pipe

  Mixing valve

   (hot water)

Solenoid valve

Solenoid valve wire

Non-return

valve

Manual valve

plug

Outdoor

Tap water

Air supply hole

controller

Indoor

Electric
heating
tube

Accompanying
heating
strap

Over flow port

S

e

n

s

o

r

Содержание GV270REMB









Отзывы: