For your safety and correct using your dryer, please observe all the instructions in this manual to
install and adjust your dryer.
Installation Instructions
If the dryer is not used with bracket, take fixed legs out
of the accessory bag and screw them into the assembly
hole of the dryer to ensure it be placed stable.
Install and use the fixed legs of your dryer
Location of your dryer
Dryer should be located in a dry and well-vented place, not filled with moisture and vapors and
where rain cannot reach (like bathroom,open balcony and water faucet).Do not locate your dryer
in a place where sunlight directly shines.
Locate your dryer on horizontal solid ground, floor or a special
bracket to prevent vibration and noise. Keep a distance of
10cm-15cm away from the rear wall when installing.
Do not use stove, gas ans etc near your dryer to avoid dangers.
The dryer has air intake and exhaust cycles,which needs
good air-exhaust vent in the rear and well-vented room.
If used in a small space, air exchange fan or exhaust
duct can be installed at the vent to exhaust hot wet air outdoors.
The length of exhaust duct shall not exceed 2m.
Special bracket and exhaust duct are available at Haier after-sal service agent for purchsing.
10-15cm
10-15cm
Soft object
Fixed legs
