Haier DW9-AFE ME, Руководство пользователя, Страница: 7 / 12

.6.
GB
Turning on the Appliance
Starting a wash cycle
After having completed all of the installation steps in the
previousparagraphs, turn on the water all the way and press the
ON/OFF button (D) located on the control panel. The "A" indicator
light will come on. At this point, the appliance is on but you must
wait a few seconds before programming the cycle setting.
Cancelling or modifying a cycle while it is underway
Premise : A cycle that is underway can only be modified if it has
only been running for a short time only. Otherwise, the deter-
gent may have already been used, and the appliance may have
already drained the wash water. If this is the case, the detergent
dispenser must be refilled (see the paragraph entitled, "Loading
the Detergent"). To modify a cycle that is already underway,
press the ON/OFF button (D), all of the settings will be cancelled.
To set a new cycle, follow the instructions contained in the para-
graph entitled "Setting and starting a wash cycle".
Setting the Wash Cycle with a Delayed Start Time
1/2 load Button
This button (see "close-up View - Control Panel", letter"E") al-
lows washing dishes using the upper rack only if there are not
enough dishes for a full load. This will allow you to save on water
and eletrical energy. It can be used before setting any of the
wash cycle, except for the intensive cycle ( if included in the wash
cycle table). Please keep in mind that the amount of detergent
should also be half.
During the delay period, it is preferable not to change any of the
settings, If this is necessary, all of the settings must be cancelled
by pressing the ON/OFF button (D).
At this point, all of the steps for "setting the wash cycle with a
Delayed Start Time" and "Setting and Starting a wash cycle" must
be repeated, following the instructions contained in the correspond-
ing sections.
If the door of the appliance is opened during the delay period, the
countdown will stop. It wil begin again when the door is closed.
The display will show the remaining time.
At the end of the wash cycle
An acoustic signal will sound six times, indicating that the
wash cycle has finished, and the cycle indicator light (J)
for the cycle will go out. Turn off the appliance using the
ON/OFF button. Turn off the water supply to the appliance
and open the door. Wait a few minutes before unloading
the dishwasher to avoid handling the dishes and utensils
while they are still hot and more susceptible to breakage.
They will also dry better.
Setting and Starting a wash Cycle
Select the desired cycle by pressing the selector button (I). Each
time the button is pressed, one of the "J" cycle indicator lights will
come on in succession. Choose the wash cycle you feel is most
appropriate for the type of dishes that need washing (consult the
wash cycle table contained in this manual,especially when first
using the appliance). After a few seconds, the wash cycle has be-
gun and can no longer be changed.
Wash Cycle Program Light
The dishwasher is equipped with a LED indicator light (J)
that blinks when the wash cycle indicated by the light itself
is activated.
By pressing "F" button (see close-up view-'Control panel") the start
of wash cycle may be delayed 1 to 12 hours.
Each time the button is pressed, the display (G) will show the
number of hours for the delay period. Choose the desired amount
of time . After selecting the wash cycle, a short acoustic signal will
sound and after a few seconds, the delay time on the display will
blink indicating that the countdown has begun.
After the time has elapsed, the cycle will start.
NOTE:
Wash Cycle adjustment Buttons