Haier DW12-CBE7 Скачать руководство пользователя страница 9

Страница: 9 / 35

Assembly Instructions for Integrated Dishwasher

The control panel (except in the completely built-in version) can be

easily aligned with the kitchen drawers, using the spacers supplied

with the appliance (see Fig.1 and Fig.2). The height of the control

panel is 115 mm, while the three spacers each add 7.5 mm in height.

Technical Information for Installation

If the kitchen decor requires that the height of the panel be modified,

it can be increased by adding spacers at the bottom of the control

panel itself (see Fig.1 and Fig.2). Each spacer adds 7.5 mm in height.

Adjusting the Height of the Control Panel

Mounting the Wooden Panel onto the Door and

Sliding the Dishwasher into the Cabinet

During the preparatory stages for installing the dishwasher into

the kitchen cabinet, holes must not be drilled in the sides, or door,

in order to avoid compromising the performance and/or operation

of the appliance. Before working on any internal components, the

unit must be disconnected from the power supply .The maximum

dimensions for the wood panel that can be installed on the door

are: Height - 610 mm ( 725 mm for the completely built-in version);

Width - 598 mm; Thickness:20 mm.

The height dimension of 610 mm must be reduced if the height of

the control panel is increased through the use of the spacers. In

addition, the base must be trimmed if it interferes with the open-

ing of the door.

Align the top edge of the template (identified with the “A” arrow ) with

the top edge of the panel. On both sides of the template (top and

bottom ) are written the various dimensions that correspond to the

different possible widths for the panel. Align the template with the

side of the panel (left or right), making sure that the panel coincides

with the appropriate dimensions. Mark the positions for the holes for

the screws, using the tip of a drill or a pencil. The three holes closest

to the side should be used(B). Repeat this step on the other side of

the panel ,using the corresponding side of the template.

Using the Drilling Template (Fig.3 - totally built-

in and Fig.4 - integrated with control panel )

115

122.5

130

137.5

145

152.5

582mm

586mm
590mm

594mm

LARGH.=598mm

594mm
590mm
586mm
582mm

115

122.5

130

137.5

145

152.5

582mm

586mm

590mm

594mm

LARGH.=598mm

115

122.5

130

137.5

145

152.5

582mm

586mm

590mm

594mm

LARGH.=598mm

594mm

590mm

586mm

582mm

LARGH.=598mm

594mm

590mm

586mm

582mm

Fig.1

Fig.2

Fig.3

Fig.4

Содержание DW12-CBE7




































Результаты поиска

Содержание DW12-CBE7

Отзывы:

Похожие инструкции для DW12-CBE7

Бренды по названию

Популярные бренды

Haier DW12-CBE7, Инструкция по эксплуатации

Результаты поиска

Содержание DW12-CBE7

Отзывы:

Похожие инструкции для DW12-CBE7

Бренды по названию

Популярные бренды