27
en
When the programme indicators “ A1,A3,A4” blinks.
Have you checked whether:
the drain hose is crimped or bent.
the drain hose is too high.
When the programme indicators “ A1,A4” blinks.
Have you checked whether:
t
he drain hose is too low.
I
f you take all these checks and the dishwasher still does not function or your dish-
washer have any other error display, you can press the programme button “G” and hold
it in for about 3 seconds, then press the ON-OFF button “A” to OFF, and wait a few
minutes. You can power the dishwasher on, try it again, if the dishwasher still does not
function and/or the problem persists, contact the nearest authorised service center and
provide them with the following information:
t
he nature of the problem.
the model type number (Mod...) And the serial number (S/N...), which are indicated on the plate
located on the side of the inner part of the door.
L
ower spray arm rotates with difficulty
S
pray arm is blocked by small items or food remains.
L
id in detergent compartment cannot be closed
D
etergent compartment has been overfilled.
Mechanism is clogged with remnants of detergent.
I
ndicator lamps do not extinguish after washing has finished
T
he ON-OFF button is still set to ON.
R
emnants of detergent stuck inside dispenser
C
ompartment was damp when it was filled up with detergent. Compartment must be dry before
detergent is added.
A1
A4
A1
A4
A3
