GENERAL OPERATION
11
12
1.Channel Changing (218 possible channels)
Use either the CH+/- buttons on the remote controller or the front panel of the TV set
to change the channels. Or directly enter the channel number with the numeric button
on the remote controller.
To select channel numbers from 10 ~ 99, press [-/--] button twice and enter the two
digits channel number. To select channel numbers from 100 ~ 217, press [-/--] button
thrice and enter the 3 digits channel number.
2.Volume Adjustment
Press the VOL+/- buttons on the remote control or the front of the TV set to adjust the
volume level. The range is 0~60. When the volume buttons are pressed, the volume
level is displayed automatically on the TV screen.
3.Standby
Using the remote controller the TV set can be placed into standby mode. To turn
the TV set back on again, press standby button on the remote controller again. It will
take a few seconds before a picture will be displayed.
4.Mute
Press the MUTE button on the remote controller to mute the TV sets sound. Pressing
the MUTE button again will turn the sound back on again.
5.Preset Picture Modes
Our engineers have designed in 4 commonly used picture settings to allow fast
picture level selection depending on what type of TV program is showing. Each
mode is selected in turn by pressing the "P. STD" button on the remote controller.
The 4 modes are: STANDARD, DYNAMIC, MILD and CUSTOM.
6.Preset Sound Modes
Our engineers have designed in 4 commonly used sound modes to allow the
best possible sound to be selected quickly. Each mode is selected in turn by
pressing the "S.STD" button on the remote controller.
The 4 modes are: NEUTRAL, MOVIE, MUSIC and MEMORY.
GENERAL OPERATION
7.Recall (on-screen display)
The CALL button on the remote controller allows the on screen menu to be
displayed, showing the channel numbers and colour system and sound system.
8.Program Scan (Automatically increments/scans the channels and displays
each channel for a short time.)
Press the SCAN button on the remote controller to turn on/off the scan feature.
9.Channel Swap (toggles between the last channel view and the current
channel)
Each time the SWAP button is pressed, the last channel view is displayed.
10.AV Input Selection
Each time the TV/AV button is pressed, the input selection will cycle among
TV- AV1- AV2- SAV- YCbCr.
Notes: I.AV1 & SAV share the same AV1 audio input.
Ⅱ
.In AV modes the RECALL status display will only display the colour
system.
