Press and hold
key until ‘+’ appears on screen.
3.Ending a call
You can end a call at any time by holding down the
key till the call has been terminated.
1.Press
key or any key (need setting) to answer the
call.
Or press
key [Silence] once to close incoming
ringer, press
[Accept] again to receive the incoming
call.
2.Press
key twice to reject the incoming call.
The phone lock code is used to protect your phone
from unauthorized use.
It can be set automatically to lock your phone each
time it is switched on or when in idle mode. In this
condition, you can only dial emergency call.
You must press
key to enter correct phone lock
code, and then access the phone menu (The default
code is 000000).
You can set protection code (PIN code) in order to
prevent random using of your phone by others. Each
time you restart your phone, the phone will prompt you
Enter the country code, area code (without prefix
zero) and phone number.
Press
key to dial.
Receiving a call
Phone Lock
PIN and PUK
6
Содержание D200
Страница 2: ...2 ...
