SERVICE MANUAL
Model:
14
Issue 2010-4-12
Rev.
Ref1004S004V0
Chapter 8 Trouble shooting
8-1. Normal phenomena
Problem
Possible Causes
What To Do
Temperature control in
OFF or Min or 0
position.
Move the control to a temperature setting.
Freezer is unplugged.
Push the plug completely into the outlet.
Freezer does
not operate or
Power-On Light
is not on
The fuse is blown/circuit
breaker is tripped.
Replace fuse or reset the breaker
Door/lid left open.
Check to see if package is holding door/lid
open.
Too frequent or too long
to door/lid openings.
Closed the door or r
educe the times of
opening the door
Freezer
starts/stops too
frequently
Temperature control set
too cold.
See About the operation of your freezer
Door/lid left open.
Check to see if package is holding door/lid
open.
Too frequent or too long
door/lid openings.
Closed the door or r
educe the times of
opening the door
Temperature control set
too cold.
See About the operation of your freezer
Inadequate air
circulation space
around cabinet.
See Preparing to install the freezer
Freezer
operates too
long
Fast Freeze switch is in
the ON position (on
some models)
See About the operation of your freezer
Floor may be weak,
causing freezer to
vibrate when
compressor is on.
Placing 2 X 4s (51 mm X 102 mm) under the
length of the freezer will help support it and
may reduce vibration.
Noisy
operation or
cabinet
vibrates
Cabinet is not
positioned solidly on
floor
See Preparing to install the freezer Or use
shims for uneven floor
Door/lid left open.
Check to see if package is holding door/lid
open.
Freezer
temperature
too warm
Too frequent or too long
door/lid openings.
Closed the door or r
educe the times of
opening the door
Foods
Temperature control
OFF or Min or 0
Move the control to a temperature setting.
