Trouble-shooting Answer to question
When spinning ,spin is off and
on .
In the spinning procedure ,
the machine does not spin .
In the process ,drain time is
set. Some minutes later
spinning begins
(If trouble appears, please first pull off the power plug, then check it). Followings are not trouble
sometimes. Please check again before you send it to repair. If there are real troubles, please call
to service department or local dealer . Do not repair it by yourself.
Problems
Possible causes
Solution
The machine stops in spinning
The draining function is not work-
ing or it's too slow.
The machine does not start.
There's abnormal sound inside
the machine.
The water tap leaks.
The top lid is not closed.
Is the drain hose put down?
Is the drain hose blocked by
foreign material?
Are the laundries put slanting-
ly?
Is the machine slanting?
Is power off?
Is the power plug loose?
Is the machine slanting?
Are the laundries slanting in
spinning?
Is the jointer screw of the water
inlet hose is loose or untighted?
Close the top lid.
Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Re-order the laundries. Close
the top lid .
Level the machine in right
position. Open and close the
top lid once.
Use it when the power is on.
Insert the power plug tightly.
Level the machine properly.
Re-order the laundries.
Fasten the jointer screw
properly.
There may be some water
flowing out of the drain hose in
the first use of the machine.
It is the water remained in
the factory inspection of
performance.