Haier AWT-80LI Скачать руководство пользователя страница 8

Ï ´ Ç ° × ¼ ± ¸

Preparation before washing
1.Connect the water inlet hose.
2.Confirm that  the washing machine is earthed
  reliably .  Then  insert  the power plug into the
  receptacle. Do not connect the earth  terminal
  to  the gas pipe and  tap water pipe.
3.Put down  the drain hose .

4.Slanting  or  uneven  ground  may  result  in 
  unstable working or abnormal noise. Please
  make the machine stand horizontally. 

Preparation before washing

Pay attention to following before washing the laundries 

Check   if 
the laundries 
has special 
requirement 
on washing

Clear the 
pocket. Take 
out  the coins, 
sand, hairpins 
etc.

Tie the long 
strips; fasten 
the buttons; 
close zippers.

When the pulsator
is  running  ,   the 
buttons   of    the 
laundries may 
cause noise. For 
the sake of 
discretion, please
put the laundries 
with buttons  into 
other laundries.

The quantity of 
the     laundries 
shall not be too 
large.    Stretch 
and  loosen the 
laundries before 
putting  them in
the tub.        

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like 
    mud or dust. For the parts with heavy soil, please apply detergent on 
    them in advance, which  can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn 
    it over before putting in.
f.  Do not put those laundries polluted by chemicals into the washing 
    machine directly.

6

Ï ´ µ Ó Î ï µ Ä ² Î ¿ ¼ Ö Ø Á ¿

 

Ï ´ µ Ó Ð ë Ö ª

Ï ´ µ Ó ¼ Á µ Ä Ê ¹ Ó Ã

The capacity of  washing  and spinning  of the 
machine refer  to the  weight of the  
standard laundries under dry condition that can
 be washed or spinned in one time. 
the largest  capacity   is only the loading capacity
of the drum

The thickness ,size , type  of  the cloth  will influ-
ence  the actual  washing  capacity.  It is  suit-
able to put  in reasonable amount of laundries  
and  the laundries can be turned round in wash-
ing for one time washing.  

Do  not   select  "  Maximum  "  water   level   for
 laundries  less  than  1.5kg, so as to  avoid 
splashing of water.  

Do s and Don ts

How to use the whitener

Fill water to decided level.  Dilute
 the whitener with container.  
Pour it slowly into the washing tub. 

Avoid  using  whitener  on  laun-
dries with color or pattern as they
 are prone to lose color. 

The  whitener  shall  not  touch  
the laundries directly. 

Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder .  Run for  30 
  seconds  to dissolve it completely.
3.Put in   laundries. Select suitable 
   water level.  

The instant dissolving of the washing 
 powder:
1.Prepare warm water of 30 C and a 
   container.
2.Add the powder while stirring to fully
   dissolve it. 

 

The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity. 
  Dosage of different washing powder is

different. Please refer to the instruction
of  the  washing  powder  for  the  detail
dosage. 
 

Refer  to  the  user's  manual  for
the usage and quantity of the
whitener. 

For powder whitener, please 
dissolve it before using. 

It is suggested not to use high sudsing detergent. 
 

How to use the washing powder

Usage of the detergent 

7

Содержание AWT-80LI









Отзывы: