background image

CONTROLLER FEATURES & SETTINGS

PAGE 2

ENGLISH

3

8

6

19

4

17

18

14

13

10

9

7

5

16

2

15

11

12

1

1

 

Power Button

 

Press the ON/OFF 

 button on the remote control to start 

the unit.

2

 

TURBO/QUIET Button

 

The TURBO function is used for fast heating or cooling. 
Press the TURBO/QUIET 

 button once and the remote 

control will display the TURBO 

 icon on the bottom right 

side of the remote display and switch the unit to the TURBO 

function. 

The QUIET function may be used when silence is needed for 

fast rest or reading.  Press the TURBO/QUIET 

 button 

again to switch to QUIET mode and the remote control will 

display the QUIET 

 

icon on the bottom left side of the 

remote display. 

Press  the TURBO/QUIET 

 button a third time to cancel 

TURBO/QUIET and return to normal operation.

Note:

TURBO/QUIET modes are only available when the unit is un

-

der cooling or heating mode (not for auto or fan mode).

Running the unit in QUIET mode for a long period of time 
may cause the room temperature to not reach the set 

temperature. If this occurs, cancel QUIET mode and set the 

fan speed to a higher setting. 

3

 

COOL Button

 

In COOL mode, the unit operates in cooling. When FAN is 
set to AUTO, the air conditioner automatically adjusts the 

fan speed according to room temperature. The 

 will be 

displayed during COOL mode.

4

 

HEAT Button

 

In HEAT mode, warm air will blow out after a short period of 

the time due to cold-air prevention function. When FAN is 

set to AUTO, the air conditioner automatically adjusts the 

fan speed according to room temperature. The 

 will be 

displayed during HEAT mode.

5

 

DRY Button

 

DRY mode is used to reduce humidity. In DRY mode, when 
room temperature becomes lower than temp. s2°F, 
unit will run intermittently at LOW speed regardless of FAN 

setting. The 

 will be displayed during DRY mode.

6

 

Tempe/- Buttons

 

Temp + Every time the button is pressed, the temperature 

setting increases.

Temp - Every time the button is pressed, temperature 

setting decreases.

The operating temperature range is 60°F-86°F (16°C-30°C).

7

 

AUTO Button

 

Under the mode of auto operation, the air conditioner will 
automatically select Cool, Heat, or Fan operation according 

to set temperature. When FAN is set to AUTO the air condi-

tioner automatically adjusts the fan speed according to room 

temperature. The 

 will be displayed during AUTO mode.

8

 

FAN Button

 

Fan speed selection
Press the FAN 

 button. For each press, fan speed changes 

as follows:

Remote control:

LOW

MED

HI

AUTO

Display 

circulated

The air conditioner fan will run according to the displayed fan 

speed.

When FAN is set to AUTO, the air conditioner automatically 
adjusts the fan speed according to room temperature.

9

 

Louver SWING Button - Vertical

 

Remote Controller

Содержание AW07LC2VHA









Отзывы: