Haier AC142ACBEA Скачать руководство пользователя | Manualshive

Страница: 14 / 26

background image

1

.

SELECTING THE MOUNTING POSITION

(1) Decide the mounting position with the customer as follows:

NOTE: The appearance may be different from models.

For authorized service personnel only

WARNING

WARNING

CAUTION

Installation of Indoor Unit

12

Be careful not to scratch the room air conditioner when handing it.
After installation, explain correct operation to the customer, according to the operating manual.
Let the customer keep this installation manual because it will be used when the room air conditioner
is serviced or moved.

(1) For the room air conditioner to operate satisfactorily, install it as outlined in this installation
manual.
(2) Connect the indoor unit and outdoor unit with the room air conditioner piping and cords available
from our standard parts. This in stallation manual describes for the correct connections so that the
installation set available from our standard parts should be used.
(3) Installation work must be performed in accordance with national wiring standards by authorized
personnel only.

(4) Never cut the power cord, lengthen or shorten the cord, or change the plug.

(5) Also, do not use an extension cord.
(6) Plug in the power cord plug firmly. If the receptacle is loose, repair it before using the room air
conditioner.
(7) Do not turn on the power until all installation work is done.

Install the indoor unit level on a strong wall, floor, ceiling which is not subject to vibration.
The inlet and outlet ports should not be obstructed: the air should be able to blow all over the room.
Install the unit near an electric outlet or special branch circuit.
Do not install the unit where it will be exposed to direct sunlight.
Install the unit where connection to the outdoor unit is easy.
Install the unit where the drain pipe can be easily installed.

Do not install where there is the danger of combustible gas leakage.
Do not install near heat sources.
If children under 10 years old may approach the unit, take preventive measures so that they
cannot reach the unit.

Install at a place that can withstand the weight of the indoor units and install positively so that
the units will not topple or fall.

«
...
12
13
14
15
16
...
»

Содержание AC142ACBEA



























Отзывы:

Нет отзывов

Похожие инструкции для AC142ACBEA

Бренд: GE Страницы: 2

MULTI-TEC W18AAPA

Бренд: Bard Страницы: 51

EVOLUTION Series

Бренд: C&H Страницы: 39

Бренд: Filters Fast Страницы: 10

Q24A1 Installationair conditioner

Бренд: Bard Страницы: 38

Hazardous Location HL Series

Бренд: Kooltronic Страницы: 19

Бренд: PremierOne Страницы: 7

Бренд: Uberhaus Страницы: 30

T?CLASS TPA024S4

Бренд: Lennox Страницы: 32

Бренд: Carrier Страницы: 37

Бренд: Payne Страницы: 6

Бренд: Winix Страницы: 84

Бренд: GE Страницы: 48

Бренд: GE Страницы: 48

AJ TNL EG Series

Бренд: Samsung Страницы: 21

Бренд: Samsung Страницы: 18

Бренд: Samsung Страницы: 14

AJ TN1DKG Series

Бренд: Samsung Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды