Switching On/Off the TV set
Choose the Menu Language
When you start using your set for the first time, you must select the language which will be used for displaying menus
and indications.
-In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an
example to help you with the TV operation.
Operation
-There are several options you might need to set up in order for your TV to work properly. Read the
instructions that follow.
Note:
If the TV in power on , the screen show information according the type of input signal . the information
will disappear. If there is no signal and bluescreen in ON the screen enter in bluescreen and display
No signal
on top and center of the screen.
1
Press the
MENU
button and then use
/
button to select the
Function
menu.
2
Press the button and then use
/
button to select
Menu
Language.
3
Press the button and then use
/
button to enter the list of
available language
.
English
Spanish or French
4
Select your language with the
/
button and press the
OK
button to confirm you selection.
5
When you are satisfied with your choice, press the
EXIT
button
to return to normal viewing or press
MENU
button to return to the
previous menu.
1.
First, connect power cord correctly.
2.
Select the viewing source by using
INPUT
button on the remote control.
3.
When finished using the TV, press the
POWER
button on the remote control. The TV reverts to standby mode.
4
. If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
: Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menu
English
Spanish
French
Menu Language English
CC Mode On
NTSC Caption CC1
DTV Caption Service1
DTV caption Style
OSD Timeout Middle
Blue Screen On
OSD transparency Middle
B
C
A
Video
Audio
Time
Channel
Function
Lock
Choose the Input source
- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are
connected to your TV.
1. Press the
INPUT
button to enter the Select Main picture Source menu
and then use
/
button to select the desired items.
Cable TV,
,
,
SVIDEO, YPBPR, VGA, HDMI.
2. Press the OK button to confirm.
3. Press INPUT
button to return to TV viewing or press EXIT
button to return to the
previous menu.
VIDEO1 VIDEO2
Select Main Source
Cable TV
VIDEO1
VIDEO2
SVIDEO
YPBPR
VGA
HDMI
Operation
Note:
1. According to your connection device, you can change the name of every source.
2. In channel menu, if the Tuner item is set ting as Air or Cable, the source menu will display Air TV or Cable TV.
Owner s Manual 21
