Convenient picture and sound control functions
Continued
How to use surround / woofer
1 Press the SOUND menu button , till the SOUND menu
shown on the right display on the screen.
2 Press the CH+/- buttons
select "SURROUND" /
"WOOFER", then press the
VOL-/+ buttons to turn the
SURROUND / WOOFER "ON".
MUTE
Sound mute
1 Press the MUTE button on the
remote control and "MUTE" type
face will display on the lower part
of the screen. At this time, the
sound of the TV set is turned off.
2 If you want to recover the sound,
press the MUTE button again or
directly press the VOL-/+ buttons.
SOUND
MUTE
Surround/woofer , mute and NICAM functions
Selecting NICAM & Mono modes
SOUND
VOLUME 45
BASS 48
TREBLE 48
BALANCE 0
WOOFER ON
SURROUND ON
This TV set is fitted with a Stereo Nicam decoder which
allows full high quality stereo sound, plus the standard
FM mono sound to be received. By pressing the I-II
button on the remote control enables the TV set to sound
to be switched between Nicam and Mono reception.
If the broadcaster is transmitting Bilingual sound service
the I-II button on the remote control will allow up to 3
separate languages to be selected.
Note: If the signal is very weak or has too much
interference such as ghosting the TV set will not be able
to receive the NICAM signal.
