2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Then Select DRY operation
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
5.Unit stop
Press ON/OFF button, the unit stops.
AUTO
LOW
MED
HI
AUTO
COOL
DRY
FAN
HEAT
1. Unit start
Press ON/OFF on the remote controller, unit starts.
11
On the displaying board,colorful displaying bar will
be light blue
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.2
o
C,unit will run intermittently
at LOW speed regardless of FAN setting.
Operation
Dry Operation
Remote controller
POWER/SOFT
FRESH