Antenna
Figure A
Figure B
Antenna cable
with a plug
Figure C
Figure D
Antenna feeder
Antenna adapter
75-300
Coaxial cable(75
Ω
) twin-lead cable(300
Ω
)
FUNCTION BUTTONS AND EXTERNAL SOCKETS
3
4
Antenna connection
Connect an antenna to the antenna socket on
the TV set, we recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75
Ω
),insert the
antenna plug (see figure C) into 75
Ω
socket
(see figure A).
2.If you use a twin-lead cable(300
Ω
),please
shape the cable as figure D, and connect the
leads to antenna adapter and then insert the
antenna adapter into the 75
Ω
socket (see
figure B).
Power source wire connection
Insert the power plug into AC outlet.
Install and replace batteries of the
remote control unit:
1.Place the remote control unit with the face
down, then open the battery cover of the
unit.
2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking
into the battery compartment.
(3)Replace the two old batteries at the
same time.
(4)Don't use charge battery (Ni-cd )and
don't mix battery type.
(5)Don't throw your batteries into a fire.
Dispose of your batteries in a required
place.
FUNCTION BUTTONS AND EXTERNAL SOCKETS
1.Front panel
(1)Remote sensor: let the remote
controller aim here, the TV set
can receive remote control signal.
(2)Power switch: press the button to
turn on the TV set ,press the button
again to turn off the TV set.
(3)Power indicator: the indicator lights
in standby status .The indicator
glints when you use remote
controller.
(4)Menu button
(5)Program up/down button
(6)Volume up/down button
(7)TV/AV switch button
(6)
(4)
(7)
(5)
(3)
(2)
(1)
MENU
-
+
VOL
TV/AV
-CH+
(1) S-VIDEO input
(2) AUDIO/VIDEO input
(3) YUV-DVD component input
(4) Antenna input
(5) AUDIO/VIDEO output
(1)
(2)
(3)
(4)
S-VIDEO
3
Y
C
b
C
r
OUT
IN
VIDEO
AUDIO
L
R
IN
(5)
2. Audio and video rear connections
S-VIDEO
Y
Cb
Cr
OUT
IN
VIDEO
AUDIO
L
R
IN
S-VIDEO
Y
Cb
Cr
OUT
IN
VIDEO
AUDIO
L
R
IN
AV2 IN
VIDEO
AUDIO
R
L
