Haier 21F99, Руководство по обслуживанию

Страница: 12 / 45

Remote control buttons
Before using the remote control, press the main power switch to turn on the TV set.
Figure 10
→
MEMORY 1
→
MEMORY 2
→
↑←
MEMORY 4
←
MEMORY 3
↵
MODE PICTURE QUALITY
MEMORY 1 DYNAMIC Bright and Dynamic effect
MEMORY 2 STANDARD Standard Picture
MEMORY 3 SOFT Soft Picture
MEMORY 4 SETTING User Set Up Picture Quanlity
Figure 11
TIME SELECTING
Press
←
or
→
button
COLOR AUTO
→
PAL
→
SECAM
↑
3.58NTSC
←
4.43NTSC
↵
↑
↓
SOUND BG
⇔
DK
①
TV/AV alternating: press this button to change from
TV to AV 1 and to S-AV 2.
②
Picture memory mode: each press of this button will
have a result as shown in Fig. 11 (see figure 11).
③
Direct program selecting: one-digit number(0-9);
two-digit number(10-99).
④
Display menu: press the button to display Program
Memory
→
Picture Quality Selection
→
Chinese/English
Selection in cycle.
⑤
Display picture mode: press the button to select
color, brightness, contrast, picture quality, and blue
background.
⑥
Menu adjustment: move up or down to adjust the
item functions.
⑦
TV system adjustment: press the button for display
on the screen (as shown in figure 12).
⑧
Mute: press the button to stop sound for a short
time, press again to resume the sound.
⑨
Timed switch off: press the button to adjust the time
for timed switch off, with the display changing in the
following order:
→
120 min.
→
110 min.
→
100
min…
→
20 min.
→
10 min.
→
OFF. once set, the TV set
will automatically shut off at the set time.
⑩
Volume adjustment:
+ press the button to increase volume;
−
press the b
utton to decrease volume.
(11) Program adjustment:
+ press the button to increase position number.
−
press the button to decrease position number.
(12) Menu selection: press up or down to select menu
functions.
(13) One/two digit position number alternating: press the
button to select one or two digit position number.
(14) Display position number: press the button and the
number of the current program will be displayed on the
screen. Press again and the position number will
disappear.
(15) Remote switch ON and OFF: press the button to
turn off the DC power supply of the TV set. To turn on
the TV set, press again this button or a digit button.
Note: In case of a power failure while watching the TV
or the TV set is not used for a long period of time (in
standby status for over 12 hours), the main power switch
shall be turned off.
Figure 12