Haier 21F8A, Руководство по обслуживанию

Страница: 15 / 34

1
3
8.Program Diagram
Insert the power plug into the power line socket and insert the antenna plug into the antenna socket
on the rear panel. Press down the power switch of the TV set. The red indicator light goes on. If no
picture appears, press the button on the remote controller. Follow the steps below.
A Program preset
1) Auto searching and storing program
Press MENU button repeatedly on the remote controller to call up the “TUNING” menu on the
screen. Then Press the key ”CH-“ or “CH+” to select the bar “ATUO MEMORY” then press the
“VOL+” to make sure. If you want to stop ,press the key “VOL- ”.
2) Manual search and fine tune
Press MENU button repeatedly to call up the “TUNING” menu on the screen. Then Press the
key ”CH-“ or “CH+” to select the bar “SEARCH” then press the key “VOL+” to make sure.
3) Deleting channel number
Press MENU button repeatedly to call up the “TUNING” menu on the screen. Press ”CH-“ or
“CH+” buttons to select item “POSITION”, then use “VOL+”, “VOL-“ or number key to enter the
channel number that you do not want to see. Then press the key ”CH-“ or “CH+” to select
“SKIP” and select SKIP to ON. Now the program number is deleted. Repeat the above steps and
select SKIP to OFF, the deleted program number can be resumed.
B Volume tuning
Press VOLUME buttons “VOL+“ to increase and “VOL-“ to decrease the volume.
C. Personal preference settings
Picture modes
Press SELC.PIC repeatedly to change the Picture Mode among DYNAMIC, STANDARD, MILD,
MEMORY, PICTURE MUTE AND COLOR MUTE.
9.Maintenance Service and Trouble shooting
9 .1.Factory adjustment information
Operation method: after the appliance is switched on, make the volume value to zero. Then
press “VOL-” key on the TV set and press the DISP button on remote controller at the same time
to enter the S state. Press DISP button one times and “S” will disappear, Repeat the first step,
you will enter the D mode. Now one “D” is displayed on the TV screen.
Press PRO- and PRO+ buttons to select items for adjustment.
Press VOL- and VOL+ buttons to adjust selected items.
Press the POWER button to switch off the appliance and go back to the normal state.
Maintenance menu (Table 8)
Program Diagram