haibike XDURO Скачать руководство пользователя

Страница: 11 / 82

Currie Tech

Technical and Customer Service: +1 800-377-4532

4 First indd

First

Bike fit

Section 1:

First

NOTE: We strongly urge you to read this

Manual in its entirety before your first ride.

At the very least, read and make sure that

you understand each point in this section,

and refer to the cited sections on any issue

which you don’t completely understand.

Please note that not all bicycles have all

of the features described in this Manual.

Ask your dealer to point out the features

of your bicycle.

Your bicycle comes with additional man-

uals and documents provided by the

manufacturers of the bicycle’s drive sys-

tem and other components. You should

read each of them before riding your

bike for the first time.

Bike fit

Is your bike the right size? To check, see

“Standover height” on page 18. If your

bicycle is too large or too small for you,

you may lose control and fall. If your

new bike is not the right size, ask your

dealer to exchange it before you ride it.

Is the saddle at the right height? To

check, see “Saddle position” on page

19. If you adjust your saddle height,

follow the Minimum Insertion instruc

tions in “Saddle position” on page 19.

Are saddle and seatpost securely

clamped? A correctly tightened saddle

will allow no saddle movement in any

direction. See “Saddle position” on page

19.

Are the stem and handlebars at the right

height for you? If not, see “Handlebar

height and angle” on page 21.

Can you comfortably operate the brakes?

If not, you may be able to adjust their

angle and reach. See “Control position

adjustments” on page 22 and “Brake

reach” on page 22.

Do you fully understand how to operate

your new bicycle? If not, before your

first ride, have your dealer explain any

functions or features which you do not

understand.

Safety first

Always wear an approved helmet when

riding your bike, and follow the helmet

manufacturer’s instructions for fit, use

and care.

Do you have all the other required

and recommended safety equipment?

Proper attire such as helmets, bright

clothing, protective glasses, and sturdy

shoes are recommended even where

not demanded by law. See the section

discussing “Safety” on page 8. It’s

your responsibility to familiarize yourself

with the laws of the areas where you ride,

and to comply with all applicable laws.

Do you know how to correctly secure

your front and rear wheels? Check

“Wheels” on page 24 to make sure.

Riding with an improperly secured wheel

can cause the wheel to wobble or disen

Содержание XDURO



















































































Результаты поиска

Содержание XDURO

Отзывы:

Похожие инструкции для XDURO

Бренды по названию

Популярные бренды

haibike XDURO, Руководство пользователя

Результаты поиска

Содержание XDURO

Отзывы:

Похожие инструкции для XDURO

Бренды по названию

Популярные бренды