HAI OmniTouch 32A00-1, Руководство по установке

Страница: 10 / 12

8
Press the [up arrow] button to raise the current setting and the [down arrow] button to lower the
current setting. When complete, press the [exit] button in the lower-right corner to save the
settings and exit.
Once the touchscreen is properly configured and communicating with the controller, other
configuration items may be configured using the "Screen Setup" page. To access the "Screen
Setup" page, from the Home page, touch the [Setup] icon. See the Touchscreen User’s Guide
(32R00-1) for additional information on these items.
Note: In the event of an AC Power failure and the HAI controller is running on backup battery
power, the touchscreen display will be lowered to its lowest viewable setting. Do not try to
adjust the “brightness” and “contrast” levels. When AC Power is restored, the touchscreen
display will automatically return to its correct settings.
RESETTING THE TOUCHSCREEN
If for any reason the touchscreen needed to be reset, remove the faceplate and press the reset
button marked "SW1" on the circuit board below the LED.