52
Control Unit / Switch Press Event Buttons
This Event Button is activated upon the following:
•
When the specified Unit is turned on or off
•
When the top-rocker or bottom-rocker is pressed on a UPB, RadioRA, or ALC switch
•
When a button is pressed on a UPB 6-Button or 8-Button Keypad
•
When a button is pressed on a RadioRA Master Control
•
When a button is pressed on a ALC 4-Button Scene Switch Module
Press the 1 (CTRL) key to select the "When Command" for a control unit event.
UNIT:
ENTER UNIT
↓
The unit may be selected by entering the unit number followed by the ' # ' key or by using the arrow keys to scroll through a list of
unit names. Select the desired unit. Next, you are prompted to specify the event that activates the program:
WHEN
Porch
Light:
0=OFF 1=ON 2=SWITCH
Press the 0 (OFF) key to select when the unit turns off or press the 1 (ON) key to select when the unit turns on (this program is
executed whenever the unit is turned off or on).
Press the 2 (SWITCH) key to select only when the top-rocker or bottom-rocker is pressed at a UPB, RadioRA, or ALC Switch
(locally at the Switch) or when a button is pressed on a keypad.
SWITCH:
0=OFF 1=ON 2-11=SW1-SW10
Press "0" to select only when the bottom-rocker (off) is pressed on the Switch. Press "1" to select only when the top-rocker (on)
is pressed on the Switch. Press "2-9" (see the Corresponding Switch Table) to select when that button is pressed on a keypad.
Press the ' # ' key to enter your selection.
Corresponding Switch Table
Switch
OmniLT
UPB 6-Button Keypad UPB 8-Button Keypad
RadioRA Master Control
ALC 4-Button
1
2
On Button
1 or E
1
1
2
3
Off Button
2 or F
2
2
3 4
A
3
or
G
3
3
4 5
B
4
or
H
4
4
5 6
C
5
or
I
5
6 7
D
6
or
J
6
7 8
7
or
K
7
8 9
8
or
L
8
9 10
9
10 11
10
Security Mode Event Buttons
Pressing the 2 (SEC) key allows you to select the event button that will be activated when a security mode changes:
0=OFF 1=DAY 2=NIGHT
3=AWAY 4=VACATION
