HAI OMNI IIe, Руководство пользователя

Страница: 112 / 118

Page 104
If an invalid card or key tag is presented:
If an invalid card is presented, the Access Control Card Reader will not beep or change the color or pattern of the LED indicators.
Logging of the User assigned to the Access Control Card or Key Tag
When a card or key tag is presented at the reader and if the card that was presented is configured to log activity, the HAI
controller will log that the user presented their card at the respective Access Control Card Reader. The HAI controller will log:
¾ The Access Control Card Reader where the card was presented
¾
The User that presented the card
¾ If the card was accepted or declined
¾ The time and date in which the card was presented
Activating an Electric or Magnetic Lock
The HAI Access Control Card Reader has an output for an electric or magnetic door lock. When a valid card or key tag is
presented at the reader, all 9 LED indicators will illuminate indicating that the door is currently unlocked (the color of the LED
indicators signifies the current security arming state for that area). The LED indicators will stay illuminated while the lock is
unlocked. The lock will remain unlocked until the “Door Unlock” time expires. The “Door Unlock” time is configured in the
setup of the reader.
Note: When a valid card or key tag is presented at the reader, all 9 LED indicators will illuminate and remain illuminated until the
“Door Unlock” time expires, even if there is not a physical lock connected to the reader.
Arming or Disarming of the Security System in the Respective Area
Each HAI Access Control Card Reader is assigned to an Area. When a valid card or key tag (a card or key tag that is valid for the
current time of day and day of week, that is assigned for the respective reader, and that has arming and disarming privileges for
the respective reader) is presented at the reader 3 times, each presentation within 5 seconds of the previous presentation of the
card, the security system will:
(a) Arm to the Away mode (in the respective area) if the security system is currently disarmed, OR
(b) Disarm the security system (in the respective area) if the security system is currently armed in any security mode
When a valid card is first presented, the Access Control Card Reader will produce a single short beep and all 9 LED indicators
will illuminate the color of the current security arming state for that area. If the card is presented 2 more times within 5 seconds
of the previous presentation of the card, the Access Control Reader will produce a single long beep and the mode of the security
system will toggle between Off (disarmed) and Away. Whenever the security mode changes, the color of the 9 LED indicators
will also change to indicate the new arming state of the area: Red to indicate Away or Green to indicate Disarmed.
Activating Automation Programs
Automation programs can be activated when a card is presented at an Access Control Card Reader. Programs can be activated
when a card is presented at a reader by any user or by a specific user and can be executed if the card was accepted or declined.
For example, swiping a card can disarm the alarm, release the door lock, light a pathway into the house, change the temperature,
and turn on several zones of a whole home audio system, and select their volume and source.