HAI Omni-Bus 125A00-1 Скачать руководство пользователя страница 3

Страница: 3 / 3

www.homeauto.com

Document: 125I00-2, Rev2.0 September 2012

KEYPAD LOCK FUNCTION

The keypad lock function can be used to prevent accidental remote

control activation.

Enabling the Keypad Lock Function

Before the keypad lock function can be used, it has to be enabled as

follows: Press and hold button 3 and 4 simultaneously until the remote

sounds a burst of beeps (after approximately 5 seconds).

Disabling the Keypad Lock Function

Press and hold button 3 and 4 simultaneously until the remote sounds

a short beep (after approximately 5 seconds).

Locking/Unlocking the Keypad

Lock or Unlock the Keypad on the Remote Control by pressing buttons

3 and 4 simultaneously. The Remote Control will sound a long beep

when the Keypad is locked and any key is pressed on the remote

control.

REMOTE CONTROL BATTERY REPLACEMENT

If the remote control does not respond to any key presses or the LED

fails to come on when a key is held in, the battery may need

replacement. The remote control uses one type

23A 12V

battery.

Содержание Omni-Bus 125A00-1

Страница 1: ...ton on the receiving device until the receiving device LED starts flashing continuously see receiving device user guide 2 Press and hold the appropriate button on the remote control until the remote s...

Страница 2: ...ices using the OMNIBUS Installation Software MANUAL PROGRAMMING 1 Select the appropriate channel on the remote control see CHANNEL SELECTION 2 Place the receiving device into the programming mode This...

Страница 3: ...onds Disabling the Keypad Lock Function Press and hold button 3 and 4 simultaneously until the remote sounds a short beep after approximately 5 seconds Locking Unlocking the Keypad Lock or Unlock the...