HAI AEGIS 3000 Скачать руководство пользователя | Manualshive

Страница: 62 / 86

background image

Page 54

Macro Button Commands

Select the 3 (BUTTON) key to program a macro button. Specify the macro button to be executed -

See

Button Programs

.

BUTTON:

ENTER BUTTON #=MENU

↓

Program All On / All Off Commands

Select the 4 (ALL) key to program All Lights On (X-10), All Units On (ALC), and All Units Off (X-10 & ALC) commands. It is
also used to program Scenes, issue the Scene On command, and issue the Scene Off command to switches that support Leviton
Scene Control.

ALL

0=OFF 1=ON 2=SCENE

If area arming is being used, the display will then prompt you for the area to control. Enter the area number followed by the ' # '
key, or use the arrow keys to scroll through a list of areas. Press the ' # ' key first to specify all areas.

Program Temperature Commands

Select the 5 (TEMP) key to control Aegis Communicating Thermostats, energy saver modules, and temperature sensors. Specify
the desired command -

See

Temperature.

TEMPERATURE:

ENTER TEMPERATURE ZONE

↓

Program Energy Cost

Select the 6 (ENERGY) key to command the energy cost rate. Specify the desired energy cost rate:

ENERGY COST:

0=LO 1=MID 2=HI 3=CRIT

Program Message Commands

Select the 8 (MESSAGE) key to show, log, clear, say, phone, or send a message. Specify the desired command -

See

Message.

MESSAGE

1=SHOW 2=LOG 3=CLEAR

↓

4=SAY 5=PHONE 6=SEND

↑

The 1 (SHOW) key allows you to display the selected text message(s) on the console's top-level display. This can be a helpful
reminder of special events and occasions.

The 2 (LOG) key allows you to store the selected text message(s) in the Event Log. This can be a helpful to keep track of the
times and dates of events and occurrences.

The 3 (CLEAR) key allows you to clear the selected text message, or all text messages from the console's display.

The 4 (SAY) key allows the controller to say the selected voice message over a speaker. This voice message can be an audible
reminder of special events and occasions (i.e. "Front Door Open" when the front door is opened).

The 5 (PHONE) key allows the controller to call the selected phone number and say the selected voice message.

The 4 (SEND) key allows you to send any a text messages through the Pro-Link serial port.

«
...
60
61
62
63
64
...
»

Содержание AEGIS 3000























































































Отзывы:

Нет отзывов

Похожие инструкции для AEGIS 3000

Бренд: PLH Products Страницы: 3

Бренд: 3Sense Страницы: 21

Бренд: Craftmade Страницы: 17

Бренд: sfty Страницы: 12

Бренд: Trust Страницы: 52

FLUSH SHUTTER DC

Бренд: QUBINO Страницы: 59

Бренд: ABB Страницы: 20

Decora Smart DZPA1

Бренд: Leviton Страницы: 2

Бренд: Leviton Страницы: 3

Decora Smart DZ15R

Бренд: Leviton Страницы: 16

Бренд: Knightsbridge Страницы: 9

IntesisHome TO-RC-WIFI-1

Бренд: Intesis Software Страницы: 6

Бренд: Consciot Страницы: 19

Бренд: Consciot Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды