α
®
hanit Recyclingprodukte
- Bankbohlen und Sitzauflagen -
®
hanit Recyclingprodukte
- Bankbohlen und Sitzauflagen -
®
hanit Recyclingprodukte
- Bankbohlen und Sitzauflagen -
®
hanit Recyclingprodukte
- Bankbohlen und Sitzauflagen -
®
hanit Recyclingprodukte
- Bankbohlen und Sitzauflagen -
Step 1
The posts are installed
at
a maximum
centre to centre distance
of 200 cm
, with the
sprue side facing downwards.
Embedment depth into a frost-resisting concrete foundation (WxL: 50x50 cm) shall be
50 cm minimum. Concrete class: C 16/20
The allowed ground pressure in the area of the foundation shall be 150 kN/m². This
has to be checked before installation.
Please also see the static calculation on www.hahnkunststoffe.de
Step 2
The middle support must be driven into ground centered between the posts. It support
the stability of the tongue & groove boards.
The groove of the middle support must fell in line with the groove of the posts and the
upper edges of the support and the foundation must be in line, too.
please take care that there are no hollows under the first row of profiles.
Step 3
Afterwards the first profile is inserted with the tongue at the top,
centered between the posts and horizontally adjusted.
The lowest row of profiles is fixed with 2 screws at one side of both
posts. There for use the screws which are part of the scope of
delivery (Torx, 6x70 mm). To fix the profiles property, the screws
must be drilled in transversely through the posts. Please pre-drill
with a 4 mm twist drill.
Step 4
now the tongue & groove boards are inserted
up to the middle row.
The center profile is placed in the mid and
fixed as decribed in step 3.
Afterwards the remaining profiles are inserted,
too. The upper row is again fixed like described
before.
Step 5
Finally the covering caps are placed on top of the posts and fixed by screws.
There for use the screws which are part of the delivery scope (Torx, 4x25 cm).
Mittelstütze
Achsmaß 200 cm
50 cm
HAHN
HAHN Kunststoffe GmbH - Gebäude 1027 - DE 55483 Hahn-Flughafen
Telefon: +49 (0)65 43 / 98 86 - 0
Mail:
Fax: +49 (0)65 43 / 98 86 - 99 Online: www.hahnkunststoffe.de
®
hanit Installation Recommendation
- View Protection Walls -
