HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]
No.
Error Code
Solution
1
Hot
1.1
Wait 18 minutes.
1.2
Plug out power cable (until handset without display)
then plug the power again. The error code will auto disappear
2
RESET
When the handset displays ”RES”, reset is required. Press
and hold the down button, after 5 seconds the desk will begin
to lower, until to the lowest height then slightly rise. Reset
finished. Release the down button.
3
E01 / E02
2.1
Please check the cables and make sure there are connected.
Then waiting 3 seconds, the error code will auto disappear.
2.2
Waiting 3 seconds, the error code will auto disappear.
If not disappear, Contact supplier.
2.3
Remove over weight, then code will auto disappear.
4
E06
When the handset displays ”RES”, reset is required. Press
and hold the down button, after 5 seconds the desk will begin
to lower, until to the lowest height then slightly rise. Reset
finished. Release the down button.
5
E07
Please remove weights to make sure
weight not over 45 kg
6
E08 / E09
Only the service voltage rise to product requirement,
then the error code will auto disappear
7
E10
Insert handset after control box already have power.
Waiting 1 seconds, the error code will auto disappear.
Errors & Solutions