4
Remove existing tank, pressure, left, and right
lines from orbital.
Install #6 JIC run tees onto tank, left, and right
ports.
Re-attach original tank, left, and right hoses to
run end of tee.
NOTE: Ports are labeled on orbital.
Attach supplied tank, left, and right steer hoses
to previously installed run tees. Use 90
o
fitting
end.
Attach provided “excess flow” hose to pressure
port on orbital.
Route hoses back to hydraulic block.
INSTALLING TANK, EXCESS FLOW, LEFT AND RIGHT STEER LINES
Tank
Pressure
Right
