Hagie NTB Series, Руководство пользователя

Страница: 29 / 52

3-15
SECTION 3 –
OPERATING YOUR NTB
4. Press YES to operate Float with the
Transom Down Switch, then press OK.
NOTE: Press NO to set Float back to
operating with the Master Spray
Switch.
5. Press OK.
6. Float will now be activated when the
Transom “Down” Switch is pressed.
Transom Switch (Up/Down)
(Default Setting)
To raise or lower the entire lift, the
Transom Switch (located on the Hydrostatic
Drive Control Handle) must be held in the UP
or DOWN positions until desired height is
reached.
One Tap Transom
The One Tap Transom feature allows the
operator to fully raise the transom by pressing
the Transom Switch (located on the
Hydrostatic Drive Control Handle) UP once,
to raise the entire lift.
1. Press the NTB Setup Button (located on
the Machine Display - Settings Page).
2. On the “NTB Adjustments” screen, press
EDIT (next to One Tap Transom Up).
3. Press YES to raise entire lift with one tap
of the Transom Up Switch, then press
OK.
NOTE: Press NO to require the Transom Up
Switch to be held the entire time that
the cylinders are raising the transom.
4. Press OK.
NTB Override Timer
The override timer controls how long the
outer sections raise with the transom during
Float operation.
1. Press the NTB Setup Button (located on
the Machine Display - Settings Page).
NTB Adjustments Screen NTB Setup Button
(Located on the Machine Display -
Settings Page)
NTB Adjustments Screen