RTN500X
Quick start configuration
After calling up the Web inter-
face, select the "Quick start"
area and log in with the factory:
Username:
admin
password:
1234
on the IP door speaker module.
NOTE:
The video stream is always
retrieved through the
main
network IP address
of the
RTD110X server and the port
defined there for the camera.
Example:
192.168.178.42:8021/
mjpg/video.mjpg
Please be sure that the device/
client you are using supports
video playback (MJPEG) or
signal image display (JPEG). A
viewer account is predefined at
the factory:
Username:
camuser
Password:
view
Quick start configuration with IP intercom server RTD110X
If there are multiple inputs, con-
figure the camera modules at
the specific entrance and con-
firm your selection with "Save".
The IP address of the camera
module is now adapted to the
configuration defined in the IP
intercom server.
IMPORTANT:
In general, no further settings
will be necessary. For more de-
tailed information, please see
the current
IP system manual
.
The quick start area is specifically adapted to the subnet configuration of the IP intercom server.
The components in the subnet should not be changed except for the adaptations described here.
English
Subject to technical changes
11
www.hager.com
!
Содержание RTN500X
Страница 26: ...26 www hager com ...
Страница 27: ...27 www hager com ...
