manualshive.com logo in svg

hager HIC4 A Series, Инструкция по эксплуатации

Поделиться
Скачать
hager HIC4 A Series Скачать руководство пользователя страница 21

6LE007621A

21

11.1.2. Reset

Operating fault reset

Open and re-close the AUT/MAN cover

11.2. 

Manual mode

To access manual mode, open the Aut/Man cover.

Once manual mode is active (cover open) it is possible:

• To lock the changeover switch.

• To access the DIP switches programmation.

•  To manually operate the changeover switch using the handle.

As soon as manual mode is activated, remote orders are inhibited (except the Genset start order in case of a mains loss.

Padlocking

Changeover switching 

Manual

DIP switch 

programmation

MANUAL MODE

11.3. 

Manual switching

Use the handle situated on the front panel under the cover to 

manoeuvre the changeover switch. To simplify the operation, it is 

advised to also use the handle extension that is delivered with the 

product.

Check the changeover switch position on the indicator situated on 

the front panel before making any operation.

 • From position I, turn anti-clockwise to get to position 0

 • From position 0, turn anti-clockwise to get to position II

 • From position II, turn clockwise to get to position 0

 • From position 0, turn clockwise to get to position I

Do not force the product (Max 8 Nm). 

(Max 8 Nm)

Extension

Содержание HIC4 A Series




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды