Hager SAS - 132 bld d’Europe - BP 78 - 67 212 Obernai cedex (FRANCE) - Tél. +333 88 49 50 50 - www.hagergroup.net
2
6E 6321.c
6E 6321.c
EG203E
§
2 channels electronic
time switch weekly cycle
User instructions
¢
Keys:
menu
: selection of operating mode
auto
: mode of running according to the pro-
gram selected.
prog
:
new
for programming mode.
prog
:
modif
to modify an existing
program.
: checking of the program.
: modification of time, date and
selection of the winter / summer time
change mode
.
: holidays.
+
and
-
: navigation or setting of values.
A
-
: in
auto
, mode, selection of overrides,
B
waivers or random operation
ok
: to validate flashing information
on display.
: to return to the previous step.
You may return into
auto
mode at any moment
using
menu
.
If no action is taken for 1 min, the switch
returns into
auto
mode.
Technical specifications
Electrical characteristics
• Supply voltage:
230 V AC ± 15%
• Frequency:
50/60 Hz
• Power consumption:
max. 6 VA à 50 Hz
• Output: 2 changeover volt free contacts
• Maximum load:
AC1
μ16A 250 V~
Cos
φ
= 0,6
μ10A 250 V~
Incandescent lighting
2300 W
Halogen lighting 230 V
2300 W
Compensated fluorescent tubes //
(max. 45 μF)
400 W
Non compensated fluorescent tubes,
compensated in series
1000 W
Compact fluorescent lamps
500 W
• Minimum current.
AC1
100 mA 250 V~
• Galvanic insulation between power supply and
output < 4 kV
Functional characteristics
• Programming capacity: 56 steps
• Minimum time between 2 steps: 1 minute
• Running accuracy: ± 1,5 sec / 24h
• Operating reserve: lithium battery provides
5 years of backup.
• The product is set into standby state
(display switched-off) after 1 minute with
power off.
It switches back into
auto
mode as soon as
power is back or when pressing any key.
• Protection degree: IP 20
Environment
• Operating temperature:
-5 °C to +45 °C
• Storage temperature:
-20 °C to +70 °C
Connection
• Flexible capacity:
1 to 6 mm
2
• Rigid capacity:
1,5 to 10 mm
2
Connection diagram:
Reset:
•
Program reset
:
the program may be completely cleared by simultaneously pressing the 3 following keys:
menu
,
ok
,
. The time and the date will be kept.
•
Total
:
pressing simultaneously the
-
,
+
,
ok
,
menu
, keys lets you clear the entire contents of the
product.
Following a total reset it is necessary to reset the time and day of the device.
ok
menu
+
A
B
1
2
3
4
L
N
1
3
5
7
2
4
6
8
EG005
Programming: prog new
Programming may be done for each day or
for a group of days. In this case instructions are
common to several days.
Days: 1 = Monday, 2 = Tuesday, 3 = Wednesday...
7 = Sunday.
1. Select the
prog
mode using
menu
,
then
ok
.
2. Select the channel (A or B) using
+
or
-
,
then
ok
.
The number of remaining program steps appears
for a short time.
3. Choose the day(s) using
+
or
-
. Validate with
ok
.
4.
ok
flashes. Use
ok
to validate the group of days.
-
or
makes it possible to reset the group of
days if necessary
5. Using
+
or
-
, select the state of the instruction:
On, Off or
. Press
ok
to validate the state.
6. Enter the time of switch-on using
+
or
-
.
Validate with
ok
.
7. Enter minutes with
+
or
-
. Validate with
ok
.
8. For On
, set the duration (seconds, then
minutes) in the same way as for the switch-on
schedule.
Program the other instructions of the group of
days by repeating operations 3 to 8.
The day or the group of days may be modified at
the during step 3 by pressing the
+
,
-
or .
At the end of programming return to
auto
mode
using the
menu
button.
To set the program of the other channel, return to prog
new mode and proceed according to steps 2 to 8.
In this mode it is also possible to add an instruction to
the program set up.
Proceed as described above.
prog
new
On
24
18
12
6
0
ok
To check the daily profile set up without the risk of
modification or deletion:
Select the mode
using
menu
and press
ok
.
Select the channel (A or B) using
+
or
-
and
ok.
The first step of Monday is displayed as well as
the daily profile.
Two options available for display :
1. Pressing repeatedly
+
or
-
: lets you shift days.
In this case only the first daily step is displayed
as well as the daily profile.
2. Pressing
ok
: all steps of each day appear one
after the other.
Display
Select the
prog
mode with
menu
and press
ok
.
Select the channel (A or B) using
+
or
-
and
ok.
Select the
modif
mode with
+
or
-
.
Validate with
ok
.
The number of remaining program steps appears
for a short time.
The first step of the first day or group of days
appears.
Repeatedly pressing the
ok
key displays all
programmed steps one at a time.
Any flashing field (state, hour, minutes) may be
modified using
+
or
-
, then validated with
ok
.
When the cursor is positioned on
ok
located
behind the group of days, you may display
successively the days or the groups of days and
switch directly to the one that has to be modified
using
+
or
-
.
To remove a program step :
select the state of the channel (One, Off or
),
press simultaneously
+
and
-
.
Clear
appears on the screen. Validate with
ok
.
Modification or clearing of a program step :
prog modif
Allows you to override the output, On or Off
for a given period.
Once done, this override will be removed
and will not be carried over to the following
year.
Select the mode
using
menu
then
ok
.
With
+
or
-
, select the state of override: On or
Off,
ok
to validate.
Enter the day then the month of the starting
period (date 1) using
+
or
-
then
ok
.
Enter in the same way the day and the month
of the ending period (date 2).
In auto mode,
flashes to indicate that
a period of holidays was programmed.
becomes permanent during the period.
The override will be effective at 0:00 of the
1st date until 23:59 from the 2nd date.
If date 1 is set before the day of
programming, the period of holidays is
valid for the following year.
To clear a period of holidays return to the
mode, press simultaneously the
+
and
-
keys.
Clear
appears. Confirm with
ok
.
Holidays
Pressing repeatedly
-
.
If the state of the output is
On
:
1
st
press:
temporary waiver.
Off
and
flash. The next program step will
let you return to the automatic
mode.
2
nd
press:
permanent override.
On
and
are permanent. This override must
be cancelled manually.
3
rd
press:
permanent override.
Off
and
are permanent. This override must
be cancelled manually.
4
th
press:
random operation. Simulation of
presence, as
well as the state
of the output are displayed. Must
be cancelled manually.
In this case the steps of the
program are shifted randomly
within a range of ± 59 min.
5
th
pressure: return to the automatic mode
.
Override -
Random operation
Select the mode
with
menu
then
ok
.
Modify the day, month, year, the hour and the
minutes using
+
or
-
and
ok
.
The time switch next suggests the winter / summer
time changes
.
Select the type of change desired using
+
or
-
.
Validate with
ok
.
Setting time and day
Winter / summer time change
The change always takes place between 2:00 and
3:00 a.m.
When the USER type is selected:
1. Enter the day then the month of the date of change
of the summer time (+ 1hour) with
+
or
-
and
ok
.
2. Enter the day then the month of the date of change
of the winter time (- 1hour) with
+
or
-
and
ok
.
The time switch will check which days of which
weeks correspond to these dates and will apply
changes to the same periods for the following years
independently of the date.
As soon as the key appears on the switch
appear on the screen.
Two types of operation:
A. Permanent override
:
Insert the key into the switch.
After 10 seconds the program contained in the
key will be executed without clearing the program
contained in the time switch.
As soon as the key is removed the program of
the time switch is again valid.
B. Copy (load) / Save (save):
The key makes it possible to save a program
contained in the time switch.
It is also possible to copy the contents of
the key into the clock.
1. Insert the key and wait for 2 sec.
2. Using menu select the mode:
save
to save a program contained in the time
switch,
load
to load the program of the key into the
time switch,
to check the program contained in the key.
3. Validate the selection with
ok
.
4. For
save
and
load
reconfirm with
ok
.
The following error messages may appear
on the screen:
no prog
: the key is empty, it does not contain any
program.
Error
: the key is that of a one-channel switch.
In these two cases:
•
Only the save
save
is possible.
•
The error message remains on display as long as
the key is present, but in this case the program of
the time switch is executed.
Key
To prevent all undesirable actions, the
keyboard of the time switch may be locked
using a key EG004.
Unlocking is done in the same way.
Locking
A warranty period of 24 months is offered on hager products,
from date of manufacture, relating to any material or manufac-
turing defect. If any product is found to be defective it must
be returned via the installer and supplier (wholesaler).
The warranty is withdrawn if :
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary to
IEE wiring regulations and accepted practice within the indus-
try at the time of installation.
- the procedure for the return of goods has not been followed.
Explanation of defect must be included when returning goods.
Waranty
GB
The type of change depends on the geographical
zone
Types available :
*
type according defect
Type
Start of time
Start of time
Zone
change Summer change Winter
of application
Euro
Last Sunday
Last Sunday
European Union
of March
of October
USA
First Sunday
Last Sunday
North America
of April
of October
GB
Last Sunday
Fourth Sunday
Only for the
of March
of October
United Kingdom
AUS
Last Sunday
Last Sunday
Australia
of October
of March
USER
Date freely
Date freely
programmed
programmed
No
No No
change
change
*
Hager 02.2010
Major characteristics
•
Product delivered with current time and date set.
•
Automatic change of winter / summer time
.
•
Programming key
.
- for permanent overrides,
- for program copy or save.
•
Programming for day or group of days.
•
56 program steps On, Off.
•
Permanent overrides On or Off (
permanent light on).
•
Temporary overrides On or Off (
flashing).
•
Holiday mode
: overrides On or Off between two dates.
•
Simulation of presence
.
•
Display bar graph of daily profile for both channels.
•
Keyboard locking possible
.
•
Programmable with power off.
•
Back lit screen.