hager EE600, Быстрое руководство

Страница: 7 / 23

Using the remote control
(Option, ref. EE806/ 52900)
The detector receives instructions from the
remote control when the Lux potentiometer
2
is
on the “auto test” position.
If the potentiometer is put on another value, the
local setting resumes.
The LED of the detector lights up to confirm the
signal with the remote control.
It flashes quickly for 2 s when an instruction is
received and 5 s for a reset.
When an instruction is not authorised, the LED
lights up for 1 s.
The available settings are :
- fixed time,
- level of luminosity,
- sensitivity,
- on / off,
- holidays
- auto
- reset (return to factory settings)
- test.
Action Settings Potentiometer
Use Auto settings
(factory)
or set by the
remote control
to switch the light
automatically
for a given time.
Auto Settings
Put the Lux potentiometer on
“auto test”.
The settings are predefined :
Lux = , (operating
at night only)
time = 3 min,
sensitivity = max.
Remote control settings
Remote control settings
(Manual Settings inhibited).
Automatically
switch on the light
for a defined time.
Installer settings
Briefly turn on
the light.
Impulse
Auto settings are usable with
time = 5 s.
(cannot be changed).
Test and validate
the detection zone.
Test mode
Move the potentiometer
2
to
“auto test”. On this position,
the remote control can be used.
After 3 min without detection of
movement, the product returns to
normal operation.
Adjust the
sensitivity.
Allows setting the range
to avoid disturbance.
Potentiometer
position
Values in lux
≤
5
≈
50/ 60
<
1000
Technical specifications
Power : around 60 W (300 W luminous energy)
Colour of the light : 5700 Kelvin
Luminous flux : 3400 lumen
Power supply : 230 V AC 50 / 60 Hz
Compulsory protection : 10 A gG/gl fuse or
16A circuit-breaker curve C or curve B
Insulation class : II
Recommended cable : U1000R02V3G1.5
Connection using
screw free terminals : 1 … 1,5 mm
2
Protection class : IP55
Operating temperature : -20 … +45 °C
Storage temperature : -20 … +60 °C
Detection angle : 220/360°
Forward detection distance : 12 m
Twilight threshold setting : 5 … 1000 lux
Operating duration setting : 5 s … 15 min
Accessories : adjustable shutters supplied,
mounting screws.
What to do if...
The floodlight does not switch on :
• In day/night mode, the twilight setting is set to
night only mode.
- Readjust.
• Incorrect adjustment of the detection zone.
- Readjust.
The floodlight does not switch off :
• Continuous movement in the detection zone.
- Inspect the detection zone, you may need to
readjust the zone or mask part of it.
The floodlight continually switches on and off :
• Animals are moving in the detection zone.
- Adjust the sensitivity.
The floodlight switches on involuntarily :
• The wind is stirring the trees and bushes in the
detection zone.
- Adjust the zone.
• Cars passing on the road are being detected
- Adjust the zone.
• Sudden temperature changes due to the weather
(wind, rain or snow).
- Adjust the zone or mount the equipment in a
different place.
Usable in all Europe
å
and in Switzerland
Hereby, hager Controls, declares that this LED floodlight is
in compliance with the essential requirements and other
relevant provisions of the low voltage directives 2006/95/EC
and CEM 2004/108/EC.
The CE declaration can be consulted on the site :
www.hagergroup.net
z
10 9