BODYMOUNT
Installation Instructions
I-EA00207
Rev 01, Rev Date: 05/08/2018
Page
1
of
2
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com
1. DESCRIPTION
2. SPECIFICATIONS
DESCRIPTION
SPECIFICATION
DIMENSIONS
12.25” x 3.00” x 2.00” (313mm x 76mm x 51mm)
WEIGHT
1.4 lbs (0.64 kg)
MATERIAL
Black painted aluminum and vinyl
3. PRECAUTIONS
q
Shut off all power going to header before attempting any wiring procedures.
q
Maintain a clean & safe environment when working in public areas.
q
Constantly be aware of pedestrian traffic around the door area.
q
Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions
by the door.
q
ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge. Before
handling any board ensure you dissipate your body’s charge.
q
Always check placement of all wiring before powering up to ensure that moving door parts will not catch any
wires and cause damage to equipment.
q
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10/19) upon completion of installation.
q
DO NOT attempt any internal repair of the sensor. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty.
EXTRUSION
MOUNTING TEMPLATE
END CAP (2)
DEVICES COVERED IN THIS DOCUMENT:
2-659-0334
2-659-0332