2
3
1
4
Dimensions apply to "all sizes".
2
3
1
4
3"
(76mm)
3/4"
(19mm)
Top of
Door
A
Frame
(Center on Hinge)
(Center on Hinge)
2-3/4"
(70mm)
7/16"
(11mm)
2"
(51mm)
B
3/8"
(10mm)
1/2"
(13mm)
Speed regulating valves toward lock stile.
2
1
2
1
2
1
CONNECTING ROD
1. PARTS
3. INSTALL CLOSER
2. MARK AND DRILL HOLES (
Right Hand Shown)
4. INSTALL CONNECTING ROD
5. INSTALL MAIN ARM
Select hand of door and the degree of door
opening. Fold template on the corresponding
line for desired degree and hand. Fold or cut
upper corner illustrated on template and align
template with the hinge edge of door. At the
“Frame Stop Line” fold toward you and attach
template to door. Mark, prep and drill/tap
1/4"-20 holes for closer body and parallel
arm bracket mounting screws.
Use adjustable wrench to rotate spindle 45˚ counterclockwise for Right Hand
Door (RH) or clockwise for Left Hand Door (LH). Place main arm on spindle so
that the “1” (RH) or “4” (LH), located on the main arm, is adjacent to the door.
Secure main arm and spindle by tightening spindle bolt.
Remove template and use
mounting screws to install the
closer body to the door and
the parallel arm bracket to
the frame soffit. Closer body
should be oriented so that the
speed regulating valves are
toward the lock stile of door.
For parallel arm application only, remove regular arm /
top jamb shoe. Attach connecting rod to the parallel
arm plate.
5400 Series Non-Hold Open Door Closer - Parallel Arm
Installation Instructions
3
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 • (800) 325-9995 • Fax (800) 782-0149
A
7-15/16"
(202mm)
B
9-1/16"
(230mm)
A
6-9/16"
(167mm)
B
7-11/16"
(195mm)
For Opening to 120
For Opening 121 to 180
Rotate 45˚
9-1/16"
(230 mm)
